How To Clean Memory Foam

A memory foam mattress (read more) is a beautiful option, but it requires proper cleaning for maintenance purposes. If you become careless in this regard, it can eat away into the life of the product, and that’s not worth it. If this investment is being made, please take the time to appreciate the necessities of cleaning thoroughly.

Here is a set of tips experts list as a must when cleaning your memory foam. Stick to these tips, and you’ll be more than okay in the long-term. In fact, your memory foam will kick on for years to come.

1. Acquire Materials/Tools


Start with the basics, and that means collecting all the necessary tools for the job at hand. It’s important to be prepared before jumping in.

  • Water
  • Spray Bottle
  • Vacuum (Hand or Regular)
  • Spray Attachment For Bottle
  • Distilled White Vinegar
  • Fabric Cleaner (Any)
  • Hair Dryer (Fan Is Okay)
  • Tarp/Mat/Sheet (Protection)
ISOLUS 2.5 Inch Ventilated Gel Memory Foam

Once you’ve compiled all of these materials and tools, you’ll be ready to take the next step. It is a must to have these on hand before you start instead of running back and forth during the process. You don’t want this to happen.

2. Vacuum With Soft Brush Only


Start by vacuuming both sides of the memory foam. You want to use a soft brush for this task, so it doesn’t eat away into the surface. Be careful with this and don’t press too hard. A gentle press against the surface will suffice.

3. Mix Cleaner And Water In Spray Bottle


Spray Bottle

Grab the fabric cleaner you’ve purchased and mix it with water in your spray bottle. Make sure to do this at a 2:1 ratio. This means that 66% of the bottle should comprise of water. The rest can be your cleaner. Don’t change this formula because it can damage the memory foam.

4. Spray Evenly


When you start spraying the formula, do not focus on one area. Take your time and spread it across the surface. Otherwise, it might leave blotches that are impossible to take out and will ruin the memory foam forever.

Spray evenly and get someone to hold it up as you do so.

5. Learn To Wait


The importance of patience comes to the forefront with this process. The reason most people fail is that they don’t wait long enough after spraying the cleaner. You want to wait for at least 30 minutes and let it soak in.

This is how the cleaning will take place.

6. Rinse Thoroughly


After 30 minutes, you can start to rinse the memory foam from all angles. Make sure to get every inch.

You want to be thorough and that means going over the same spot twice to ensure the cleaner does get out. If not, it may get ruined.

rinse-memory-foam

7. Never Wring Or Squeeze


The next tip is to remove all excess water by pressing down on the memory foam. Never wring it like you would for a towel. This will destroy the memory foam’s structural integrity.

Press down and let it air dry.

This is always the safest route to take.

8. Use Hair Dryer (Lowest Setting)


The final step or tip isn’t necessary during this process but can be utilized.

Use Hair Dryer

Take a hair dryer (lowest setting) and run it across the memory foam. Do not hold it too close or it might burn the material. Be patient while doing this and don’t drag the process on for hours. It should take no longer than 5-10 minutes.

After this point, let it sit out and air dry. This is always the best approach to drying with such products.

Conclusion


Take your time and understand doing this right is important rather than doing it quickly. Those who take their time are going to add life to their memory foam instead of ruining it.

Please do this as often as you can and set a schedule. It is highly recommended and is the number one reason some people enjoy a longer lifespan for their memory foam while others rush to the store for a new purchase.

Additional Resources

Leave a Comment:

All fields with “*” are required

Leave a Comment:

All fields with “*” are required

Pin It on Pinterest